Main Category: Engineering & Technology >> Sub Category: Electrical Engineering
A Textbook of Electrical Technology

Establishment of Technological Universities have taken place in recent past. This resulted into a pool of expert manpower within a large area. Unification of syllabi has taken place and the question papers set during the last 4-5 years have a wider variety and are of more inquisitive nature. Solutions to these with brief logical reasonings have been added in this book for the benefit of our student community.     

Author Name :A. K. Theraja, B. L. Theraja

No Of Visit :335      Posted Comments :

Principles of Electrical Machines

Deals with DC generators, armature reaction and communication, DC generators characteristics, DC motors, speed control of DC motors, and testing of DC.     

Author Name :V.K. Mehta, Rohit Mehta

No Of Visit :702      Posted Comments :

Computer-aided Design of Electrical Machines

The aim of this book is to present the sequential steps for developing the computer programs for the design of electrical machines, using well-established design formulae. The data of magnetic and non-magnetic materials used in latest designs by industries, is applied for optimizing the design.     

Author Name :K.M. Vishnu Murthy

No Of Visit :913      Posted Comments :

CONTINUUM MECHANICS and Elements of Elasticity/Structural Mechanics

In the humble opinion of the author, this is best achieved in three stages. First, the student should be exposed to the basic principles of Continuum Mechanics. Detailed coverage of Stress, Strain, General Principles, and Constitutive Relations is essential. Then, a brief exposure to Elasticity (along with Beam Theory) would convince the student that a well posed problem can indeed have an analytical solution. However, this is only true for problems problems with numerous simplifying assumptions (such as linear elasticity, small deformation, plane stress/strain or axisymmetry, and resultants of stresses). Hence, the last stage consists in a brief exposure to solid mechanics, and more precisely to Variational Methods. Through an exposure to the Principle of Virtual Work, and the Rayleigh-Ritz Method the student will then be ready for Finite Elements. Finally, one topic of special interest to Material Science students was added, and that is the Theoretical Strength of Solids. This is essential to properly understand the failure of solids, and would later on lead to a Fracture Mechanics course.     

Author Name :VICTOR E. SAOUMA

No Of Visit :256      Posted Comments :

Advances for In-Vehicle and Mobile Systems

This second volume on a popular topic brings together the works of scholars working on the latest techniques, standards, and emerging deployment on "living in the age of wireless communications and smart vehicular systems." The format of this work centers on four themes: driver and driving environment recognition, telecommunication applications, noise reduction, dialogue in vehicles. Will interest researchers and professionals working in signal processing technologies, next generation vehicle design and networks for mobile platforms.     

Author Name :Huseyin Abut, John H.L. Hansen, Kazuya Takeda

No Of Visit :612      Posted Comments :

Electronic Circuits for the Evil Genius

There is truly a lack of good, basic hardwire electronic "how-to" books. The market seems interested in this type of fun project compilation. This is another book in our extremely successful "Evil Genius" series. So far, each of the books has sold about $50,000 in less than 3 months. The perfect addition to our "Evil Genius" series, this book details everything an electronics hobbyist would want to know about circuits and circuit design through 57 Lessons. Readers work through 5 distinct, useful projects to reinforce their learning.     

Author Name :Dave Cutcher

No Of Visit :528      Posted Comments :

Electrical Contacts

Various factors affect the performance of electrical contacts, including tribological, mechanical, electrical, and materials aspects. Although these behaviors have been studied for many years, they are not widely used or understood in practice. Combining approaches used across the globe, Electrical Contacts: Fundamentals, Applications, and Technology integrates advances in research and development in the tribological, material, and analytical aspects of electrical contacts with new data on electrical current transfer at the micro- and nanoscales.Taking an application-oriented approach, the authors illustrate how material characteristics, tribological behavior, and loading impact the degradation of contacts, formation of intermetallics, and overall reliability and performance. Coverage is divided broadly into three sections, with the first focused on mechanics, tribology, materials, current and heat transfer, and basic reliability issues of electrical contacts. The next section explores applications, such as power connections, electronic connections, and sliding contacts, while the final section presents the diagnostic and monitoring techniques used to investigate and measure phenomena occurring at electrical contact interfaces. Numerous references to current literature reflect the fact that this book is the most comprehensive survey in the field. Explore an impressive collection of data, theory, and practical applications in Electrical Contacts: Fundamentals, Applications, and Technology, a critical tool for anyone investigating or designing electrical equipment with improved performance and reliability in mind.     

Author Name :Milenko Braunovic, Valery V. Konchits,Nikolai K. Myshkin

No Of Visit :511      Posted Comments :

Materials for High-Density Electronic Packaging and Interconnection

What is packaging? The subject of this report is commonly referred to as electronic packaging, but the term '"packaging" carries connotations that tend to trivialize the highly technical and critically important electronic context. Electronic packaging now goes well beyond physical protection and includes electric power distribution, signal transmission between integrated circuits, and, of growing importance, the removal of heat associated with the very high densities of circuit elements that are being achieved. Modern system performance is as much limited by these functions as by the operation of the integrated circuits.     

Author Name :Committee on Materials for High-Density Electronic Packaging

No Of Visit :185      Posted Comments :

Nanoscale Interface for Organic Electronics

The scope of this book will be focused on the interface issues and problems in organic materials as electronic device applications. The organic material electronics is a rapidly progressing field for potential applications in flexible field effect transistors, plastic solar cells, organic luminescent devices, etc.However, the performance of these organic devices is still not sufficient. To enhance the understanding and practical applications of organic devices, we need to understand the fundamental organic device physics which is somewhat different from the conventional inorganic device physics. This book will discuss the detailed progress in these topics.     

Author Name :Mitsumasa Iwamoto, Young-Soo Kwon, Takhee Lee

No Of Visit :181      Posted Comments :

LED for Lighting Applications

Light Emitting Diodes (LEDs) are no longer confined to use in commercial signage and have now moved firmly, and with unquestioned advantages, into the field of commercial and domestic lighting. This development was prompted in the late 1980s by the invention of the blue LED, a wavelength that had previously been missing from the available LED spectrum and which opened the way to providing white light. Since that point, LED performance (including energy efficiency) has improved dramatically, and now compares with the performance of fluorescent lights - and there remain further performance improvements yet to be delivered.The book begins with the principles of LED lighting, then focuses on issues and challenges. Chapters are devoted to key steps in LED manufacturing: substrate, epitaxy, process and packaging. Photoelectric characterization of LEDs, Lighting with LEDs and the imposition of a certain level of color quality, are the subject of later chapters, and finally there is a detailed discussion of the emergence of OLEDs, or organic LEDs, which have specific capabilities of immediate interest and importance in this field.     

Author Name :Patrick Mottier

No Of Visit :184      Posted Comments :

Numerical Modelling and Design of Electrical Machines and Devices

Designed for undergraduates, graduates and practicing engineers, this text provides an up-to-date overview of numerical field computational methods and, in particular, of the finite element method (FEM) in magnetics. Particular attention is paid to the practical use of the FEM in designing electromagnetic devices such as motors, transformers and actuators.The book is based on the authors' extensive experience teaching numerical techniques to students and design engineers from industry and is ideal for use by anyone who wishes to learn fundamentals and immediately apply these to actual design problems.     

Author Name :K. Hameyer, Ronnie Belmans

No Of Visit :168      Posted Comments :

Delmar's Standard Textbook of Electricity,5 edition

Mastering the theory and application of electrical concepts is necessary for a successful career in the electrical installation or industrial maintenance fields, and this new fifth edition of DELMAR'S STANDARD TEXTBOOK OF ELECTRICITY delivers! Designed to teach by blending concepts relating to electrical theory and principles with practical 'how to' information that prepares you for situations commonly encountered on the job. Topics span all the major aspects of the electrical field including atomic structure and basic electricity, direct and alternating current, basic circuit theory, three-phase circuits, single phase, transformers, generators, and motors. This revision retains all the hallmarks of our market-leading prior editions and includes enhancements such as updates to the 2011 NEC, a new chapter on industry orientation, and new coverage of constant-current transformers and fuel cells as well as tips on energy efficiency throughout the text.     

Author Name :Stephen Herman

No Of Visit :517      Posted Comments :

Getting Started in Electronics

This is a complete electronics course in 128 pages! Author Forrest Mims teaches you the basics, takes you on a tour of analog and digital components, explains how they work, and shows you how they are combines for various applications. Includes circuit assembly tips and 100 electronic circuits and projects you can build and test.     

Author Name :Forrest M. Mims III

No Of Visit :519      Posted Comments :

Power Systems Analysis (2nd Edition)

This is the first book on power system analysis to explore the major changes in the structure and operation of the electric utility industry, and to show how power system operation will be affected by the new changes. It reflects the trends in state-of-the-art, computer-based power system analysis and shows how to apply each modern analysis tool in designing and improving an expansion of an existing power system. KEY FEATURES: Features a computer-based design example (carried out from chapter-to-chapter) which uses all the analysis. As the example develops, readers determine the parameter values for a proposed transmission system upgrade to support load growth and a new steel mill being located in the area; convert all the parameters to per unit -- the preferred choice of units for system analysis; determine typical parameters for the generators in the system being designed; develop the admittance matrix and the impedance matrix for the system being designed; conduct the power flow and check the designed system for possible violations, and appropriately modify the design; and conduct a contingency analysis on the designed system; analyze the behavior of the designed system under faulted condition; continue the design with a selection of relay settings to protect the system in the event of these faulted conditions; and perform a transient stability simulation on the system and verify the ability of the system to remain stable. For engineers working in the electric utility industry.     

Author Name :Arthur R. Bergen, Vijay Vittal

No Of Visit :185      Posted Comments :

Complete Digital Design

There are over 350,000 electrical and electronics engineers, and hundreds of thousands more electronics technicians and hobbyists. With the addition of so many communications topics into EE programs in the past 5 years, fundamentals of digital design have been abandoned for briefer, overview courses, leaving many newly-minted EEs undereducated in what should be one of their core competencies. In order to design and implement digital systems, one must understand and navigate many components, architectures, and practices which are painfully inter-dependent. This book will allow the reader faced with a design problem to develop a customized set of requirements for that problem, then research and evaluate available components and technologies to solve it.     

Author Name :Mark Balch

No Of Visit :521      Posted Comments :

Principles of Modern Digital Design

A major objective of this book is to fill the gap between traditional logic design principles and logic design/optimization techniques used in practice. Over the last two decades several techniques for computer-aided design and optimization of logic circuits have been developed. However, underlying theories of these techniques are inadequately covered or not covered at all in undergraduate text books. This book covers not only the "classical" material found in current text books but also selected materials that modern logic designers need to be familiar with.     

Author Name :Parag K. Lala

No Of Visit :512      Posted Comments :

Delta-Sigma Data Converters

This comprehensive guide offers a detailed treatment of the analysis, design, simulation and testing of the full range of today's leading delta-sigma data converters. Written by professionals experienced in all practical aspects of delta-sigma modulator design, Delta-Sigma Data Converters provides comprehensive coverage of low and high-order single-bit, bandpass, continuous-time, multi-stage modulators as well as advanced topics, including idle-channel tones, stability, decimation and interpolation filter design, and simulation.     

Author Name :Steven R. Norsworthy, Richard Schreier, Gabor C. Temes

No Of Visit :504      Posted Comments :

A First Course in Electrical and Computer Engineering

This book was written for an experimental freshman course at the University of Colorado. We wanted to pique student interest in engineering by providing with exposure to the types of problems that electrical and computer engineers are asked to solve.     

Author Name :Louis Scharf

No Of Visit :537      Posted Comments :

Electrical Power Cable Engineering Second Edition

Electrical Power Cable Engineering, Second Edition remains the foremost reference on low- and medium-voltage electrical power cables, cataloging technical characteristics and assuring success for cable manufacture, installation, operation, and maintenance. While segments on electrical cable insulation and field assessment have been revamped to reflect industry transformations, new chapters tackle distinctive topics like the location of underground system faults and the thermal resistivity of concrete, proving that this expanded edition lays a sound foundation for engineering decisions. It deconstructs the external variables affecting conductor, insulation, and shielding design.     

Author Name :William A.Thue

No Of Visit :493      Posted Comments :

Electric Power Distribution Handbook

Of the ...big three... components of the electricity infrastructure, distribution typically gets the least attention, and no thorough, up-to-date treatment of the subject has been published in years. Filling that void, the Electric Power Distribution Handbook provides comprehensive information on the electrical aspects of power distribution systems. It is an unparalleled source for the background information, hard-to-find tables, graphs, methods, and statistics that power engineers need, and includes tips and solutions for problem solving and improving performance. In short, this handbook gives readers the tools they need to understand the science and practices of distribution systems.     

Author Name :Thomas Allen Short

No Of Visit :558      Posted Comments :

Design of Rf and Microwave Amplifiers and Oscillators

This newly revised edition of the classic book, Design of RF and Microwave Amplifiers and Oscillators (Artech House, 1999) has been updated to include expanded derivations and problem sets, helping to make the material even more accessible and easier to master. You also get new material on power amplifiers (class A, B, AB, F, and E amplifiers, as well as Doherty amplifiers are covered), amplifier stability, and designing conditionally stable amplifiers. Moreover, the new edition discusses the influence of harmonic terminations on power performance and presents accurate. models for square spiral inductors and MIM capacitors. These models can be used to design MMIC amplifiers at microwave and millimeter frequencies.This practical book helps you estimate the 1dB compression point of linear amplifiers, and provides the information required to generate load-pull contours for these amplifiers. The programs supplied with the previous edition of this book have been upgraded and are now integrated into a single Visual C++ program (LSM), with a menu-driven interface. Single- and double-matching problems can be solved with LSM, and the LSM executable is licensed with the book.     

Author Name :Pieter L. D. Abrie

No Of Visit :481      Posted Comments :

Submarine Power Cables

The demand for high-performance submarine power cables is increasing as more and more offshore wind parks are installed, and the national electric grids are interconnected. Submarine power cables are installed for the highest voltages and power to transport electric energy under the sea between islands, countries and even continents. The installation and operation of submarine power cables is much different from land cables. Still, in most textbooks on electrical power systems, information on submarine cables is scarce. This book is closing the gap. Different species of submarine power cables and their application are explained. Students and electric engineers learn on the electric and mechanic properties of submarine cables. Project developers and utility managers will gain useful information on the necessary marine activities such as pre-laying survey, cable lay vessels, guard boats etc., for the submarine cable installation and repair. Investors and decision makers will find an overview on environmental aspects of submarine power cables. A comprehensive reference list is given for those who want further reading.     

Author Name :Thomas Worzyk

No Of Visit :165      Posted Comments :

Operation of Restructured Power Systems

A highlight of the book is the extensive coverage and country specific information provided on various operational aspects of restructured power systems worldwide. Operation of Restructured Power Systems presents a discussion of restructured electricity markets that have been established in various degrees and forms in many countries. This book comes at a time when the deregulation process is poised to undergo further rapid advancements. It is envisaged that the reader will benefit by way of an enhanced understanding of power system operations in the conventional vertically integrated environment vis-a-vis the deregulated environment.     

Author Name :Kankar Bhattacharya, Math H.J. Bollen, Jaap E. Daalder

No Of Visit :481      Posted Comments :

Variation Aware Analog and Mixed-Signal Circuit Design in Emerging Multi-Gate CMOS Technologies

Since scaling of CMOS is reaching the nanometer area serious limitations enforce the introduction of novel materials, device architectures and device concepts. Multi-gate devices employing high-k gate dielectrics are considered as promising solution overcoming these scaling limitations of conventional planar bulk CMOS. Variation Aware Analog and Mixed-Signal Circuit Design in Emerging Multi-Gate CMOS Technologies provides a technology oriented assessment of analog and mixed-signal circuits in emerging high-k and multi-gate CMOS technologies.     

Author Name :Michael Fulde

No Of Visit :507      Posted Comments :

From Boolean Logic to Switching Circuits and Automata

Logic networks and automata are facets of digital systems. The change of the design of logic networks from skills and art into a scientific discipline was possible by the development of the underlying mathematical theory called the Switching Theory. The fundamentals of this theory come from the attempts towards an algebraic description of laws of thoughts presented in the works by George J. Boole and the works on logic by Augustus De Morgan.As often the case in engineering, when the importance of a problem and the need for solving it reach certain limits, the solutions are searched by many scholars in different parts of the word, simultaneously or at about the same time, however, quite independently and often unaware of the work by other scholars. The formulation and rise of Switching Theory is such an example.This book presents a brief account of the developments of Switching Theory and highlights some less known facts in the history of it. The readers will find the book a fresh look into the development of the field revealing how difficult it has been to arrive at many of the concepts that we now consider obvious . Researchers in the history or philosophy of computing will find this book a valuable source of information that complements the standard presentations of the topic.     

Author Name :Radomir S. Stankovic, Jaakko Astola

No Of Visit :504      Posted Comments :

Analog Filters 2nd edition

Analog Filters, Second Edition covers four major fundamental types of analog filters - passive, op amp-RC, switched-capacitor, and operational transconductance amplifier-capacitor (OTA-C). (The last of these types is the major addition in the Second Edition). The emphasis is on the fundamental principles and theory of analog filters. It is targeted toward readers in telecommunications, signal processing, electronics, controls, instrumentation, bioengineering, etc. It introduces the reader to the elegant theory in the development of analog filters. Although some of the mechanical steps for generating filters are covered, the book stresses the mathematical bases and the scholastic ingenuity of analog filter theory. It should be helpful to nonspecialist electrical engineers to gain a background perspective and some basic insight to the development of real-time filters. In many modern advances in signal processing, their concepts and procedures have close links to analog filters. The material in this book will provide engineers with a better perspective and more penetrating appreciation of many modern signal-processing techniques.     

Author Name :Kendall Su

No Of Visit :501      Posted Comments :

Magnetics Design Magnetics Design for Switching Power Supplies

Proper design and implementation of magnetic components for SMPS     

Author Name :Lloyd H. Dixon

No Of Visit :185      Posted Comments :

Electric Fields in Composite Dielectrics and their Applications

An accurate quantitative picture of electric field distribution is essential in many electrical and electronic applications. In composite dielectric configurations composed of multiple dielectrics, anomalous or unexpected behavior of electric fields may appear when a solid dielectric is in contact with a conductor or another solid dielectric. The electric field near the contact point may become higher than the original field not only in the surrounding medium but also in the solid dielectric. Theoretically it may become infinitely high, depending on the contact angle. Although these characteristics are very important in a variety of applications, they have been clarified only recently using analytical and numerical calculation methods, and this is the first book to cover these new findings.Electric Fields in Composite Dielectrics and Their Applications describes the fundamental characteristics and practical applications of electric fields in composite dielectrics. The focus is on the field distribution (and the resultant force when appropriate) near points of contact. Applications include insulation design of high-voltage equipment with solid insulating supports, utilization of electrostatic force on dielectric particles in electrophotography and electrorheological fluids, and others. Electric Fields in Composite Dielectrics and Their Applications also explains the calculation methods used to analyze electric fields in composite dielectrics.     

Author Name :Tadasu Takuma, Boonchai Techaumnat

No Of Visit :485      Posted Comments :

Electrical Power Systems and Computers

This volume includes extended and revised versions of a set of selected papers from the International Conference on Electric and Electronics (EEIC 2011) , held on June 20-22 , 2011, which is jointly organized by Nanchang University, Springer, and IEEE IAS Nanchang Chapter.The objective of EEIC 2011 Volume 3 is to provide a major interdisciplinary forum for the presentation of new approaches from Electrical Power Systems and Computers, to foster integration of the latest developments in scientific research. 133 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Xiaofeng Wan.We hope every participant can have a good opportunity to exchange their research ideas and results and to discuss the state of the art in the areas of the Electrical Power Systems and Computers.     

Author Name :Xiaofeng Wan

No Of Visit :519      Posted Comments :

Low Voltage Wiring 3rd edition

The A-Z reference on designing, installing, maintaining, and troubleshooting modern security and fire alarm systems is now fully up-to-date in a new edition. Prepared by Terry Kennedy and John E. Traister, authors with over three decades of hands-on experience apiece in the construction industry, Low Voltage Wiring: Security/Fire Alarm Systems, Third Edition provides all the appropriate wiring data you need to work on security and fire alarm systems in residential, commercial, and industrial buildings. A CD-ROM packaged with the book conveniently puts at your fingertips sample forms, checklists, a fully-searchable glossary, and hot-linked industry reference URLs. In addition, you get: *Important safety tips * Lists of regulations * Explanations of emerging technologies *Useful treatments of estimating and bidding * Much more     

Author Name :Terry Kennedy, John E. Traister

No Of Visit :474      Posted Comments :

Small Wind Turbines

Small Wind Turbines provides a thorough grounding in analysing, designing, building, and installing a small wind turbine. Small turbines are introduced by emphasising their differences from large ones and nearly all the analysis and design examples refer to small turbines.The accompanying software includes MATLAB programs for power production and starting performance, as well as programs for detailed multi-objective optimisation of blade design. A spreadsheet is also given to help readers apply the simple load model of the IEC standard for small wind turbine safety. Small Wind Turbines represents the distilled outcome of over twenty years experience in fundamental research, design and installation, and field testing of small wind turbines.Small Wind Turbines is a suitable reference for student projects and detailed design studies, and also provides important background material for engineers and others using small wind turbines for remote power and distributed generation applications.     

Author Name :David Wood

No Of Visit :496      Posted Comments :

Moisture Sensitivity of Plastic Packages of IC Devices

Moisture Sensitivity of Plastic Packages of IC Devices provides information on the state-of-the-art techniques and methodologies related to moisture issues in plastic packages. The most updated, in-depth and systematic technical and theoretical approaches are addressed in the book. Numerous industrial applications are provided, along with the results of the most recent research and development efforts, including, but not limited to: thorough exploration of moisture's effects based on lectures and tutorials by the authors, consistent focus on solution-based approaches and methodologies for improved reliability in plastic packaging, emerging theories and cutting-edge industiral applications presented by the leading professionals in the field. Moisture plays a key role in the reliability of plastic packages of IC devices, and moisture-induced failures have become an increasing concern with the development of advanced IC devices. This second volume in the Micro- and Opto-Electronic Materials, Structures, and Systems series is a must-read for researchers and engineers alike.     

Author Name :X.J. Fan , E. Suhir

No Of Visit :495      Posted Comments :

Transient Stability of Power Systems

Transient Stability of Power Systems is a monograph devoted to a hybrid-direct temporal method called SIME (for Single Machine Equivalent). SIME processes temporal information about the multimachine system dynamics to assess and control any type of transient instabilities under any type and model of power systems. Two approaches may be distinguished depending upon the source of information used: `Preventative SIME' which relies on a time-domain program to simulate anticipated contingencies, and `Emergency SIME' which uses real-time measurements. Preventative SIME mainly comprises two techniques: contingency filtering, ranking, and assessment; and (simultaneous) stabilization of harmful contingencies. The resulting preventative transient stability assessment and control (TSA&C) software can be used in all application contexts of transient stability studies. In a control center, for instance, its computational performances enable it to cope with very stringent requirements of real-time operation. Besides, interfacing SIME with an OPF algorithm allows combining transient stability constraints with specifics of the liberalized electricity market. Emergency SIME is a novel closed-loop control technique which contains the transient instabilities caused by contingencies' actual occurrence. It relies on real-time measurements to predict (the size of) instability and, accordingly, to design and trigger control actions able to impede system loss of synchronism. Emergency SIME is particularly suitable for protecting important generation sites and can complement preventative SIME. Both approaches rely on the same principles and basic software which yields a comprehensive and unified approach to TSA&C. The design of near optimal control techniques is a major asset of this software. This book provides extensive illustrations on a variety of power systems ranging from a simple 3-machine test system to real-world power systems comprising up to 627 generators and 4112 busses. Transient Stability of Power Systems will be especially helpful to researchers, utility engineers, and software designers and developers who are developing various types of transient stability software packages.     

Author Name :Mania Pavella, Damien Ernst,Daniel Ruiz-Vega

No Of Visit :507      Posted Comments :

Microfluidics and Microfabrication

Microfluidics and Microfabrication discusses the interconnect between microfluidics, microfabrication and the life sciences. Specifically, this includes fundamental aspects of fluid mechanics in micro-scale and nano-scale confinements and microfabrication. Material is also presented discussing micro -textured engineered surfaces, high-performance AFM probe-based, micro-grooving processes, fabrication with metals and polymers in bio-micromanipulation and microfluidic applications. Editor Suman Chakraborty brings together leading minds in both fields who also: * Coverthe fundamentals of microfluidicsin a manneraccessible to multi-disciplinary researchers, with a balance of mathematical details and physical principles * Discuss the explicit interconnection between microfluiodics and microfabrication from an application perspective * Detailthe amalgamation of microfluidics with logic circuits and applications in micro-electronics.Microfluidics and Microfabrication is an ideal book forresearchers, engineers and senior-level graduate students interested inlearning more about the two fields.     

Author Name :Suman Chakraborty

No Of Visit :488      Posted Comments :

Practical Lighting Design with LEDs

This book covers all of the information needed to design LEDs into end-products. It is a practical guide, primarily explaining how things are done by practicing engineers. Equations are used only for practical calculations, and are kept to the level of high-school algebra. There are numerous drawings and schematics showing how things such as measurements are actually made, and showing curcuits that actually work. There are practical notes and examples embedded in the text that give pointers and how-to guides on many of the book's topics. After reading each chapter of the book, readers will have the knowledge to implement practical designs. This book will be kept as a reference tool for years to come.     

Author Name :Ron Lenk, Carol Lenk

No Of Visit :485      Posted Comments :

Handbook of Electrical Installation Practice

Handbook of Electrical Installation Practice covers all key aspects of industrial, commercial and domestic installations and draws on the expertise of a wide range of industrial experts.Chapters are devoted to topics such as wiring cables, mains and submains cables and distribution in buildings, as well as power supplies, transformers, switchgear, and electricity on construction sites. Standards and codes of practice, as well as safety, are also included.Since the Third Edition was published, there have been many developments in technology and standards. The revolution in electronic microtechnology has made it possible to introduce more complex technologies in protective equipment and control systems, and these have been addressed in the new edition.Developments in lighting design continue, and extra-low voltage luminaries for display and feature illumination are now dealt with, as is the important subject of security lighting.All chapters have been amended to take account of revisions to British and other standards, following the trend to harmonised European and international standards, and they also take account of the latest edition of the Wiring Regulations.This new edition will provide an invaluable reference for consulting engineers, electrical contractors and factory plant engineers.     

Author Name :Geoffrey Stokes

No Of Visit :489      Posted Comments :

Potential Flows of Viscous and Viscoelastic Liquids

The goal of this book is to show how potential flows enter into the general theory of motions of viscous and viscoelastic fluids. The theory is applied to problems of the motion of bubbles, to the decay of waves on interfaces between fluids, to Rayleigh-Taylor and Kelvin-Hemholtz instabilities, to viscous effects in acoustics, and to boundary layers on solids at finite Reynolds numbers.     

Author Name :Daniel Joseph, Toshio Funada, Jing Wang

No Of Visit :144      Posted Comments :

Software Engineering for Image Processing Systems

Software Engineering for Image Processing Systems creates a modern engineering framework for the specification, design, coding, testing, and maintenance of image processing software and systems. The text is designed to benefit not only software engineers, but also workers with backgrounds in mathematics, the physical sciences, and other engineering disciplines, who find themselves working on a software project team. The author classifies imaging software as its own distinct caste, thereby providing a common language and framework for imaging engineers of all backgrounds. This common framework could, in turn, lead to more robust, reliable and economical software throughout the imaging industry.     

Author Name :Philip A. Laplante

No Of Visit :473      Posted Comments :

Classical Electromagnetic Theory 2nd edition

Accentuates the relation of electric and magnetic theories. An extensive chapter on the solution of Laplace's equation explores most techniques used in electro- and magnetostatics including conformal mappings and separation of variables in unusual coordinate systems. Covers the use of image charges; introduces Green's functions; provides an expansive treatment on radiation. Features an abundance of examples and exercises.     

Author Name :Jack Vanderlinde

No Of Visit :526      Posted Comments :

Fundamentals of Electric Circuits 4 Edition

New to This Edition:A course in circuit analysis is perhaps the first exposure students have to electrical engineering. This is also a place where we can enhance some of the skills that they will later need as they learn how to design. In the fourth edition, we have included a very significant new feature to help students enhance skills that are an important part of the design process. We call this new feature, design a problem. We know it is not possible to fully develop a students design skills in a fundamental course like circuits. To fully develop design skills a student needs a design experience normally reserved for their senior year. This does not mean that some of those skills cannot be developed and exercised in a circuits course. The text already included openended questions that help students use creativity, which is an important part of learning how to design.     

Author Name :Charles K. Alexander, Matthew N. O. Sadiku

No Of Visit :498      Posted Comments :

SEARCH BY CATEGORIES

Arts & Humanities

Science

Social Science

Mathematics

Engineering & Technology

Business & Finance

Media & Entertainment

Sports & Games

General Knowledge

Business Admin and Management

Medical

Travel & Adventure

Society, Entertainment & Lifestyle

MAGAZINES